Auto Tilt Cask Racking System - PRICES START FROM[KERS]

Auto tilt racking system for the popular 9 & 18 Gallon Stillages

To pick the size required, please refer to the table and drop down box towards the bottom of this page

HELPFUL HINT: The picture is of a 4 over 4 (8RS) which would cost £425 + £520 + £55 + VAT

Special Order Frame can be altered to reduce the overall height of the racking to fit smaller cellars. Call 01305 819002 for further information.

The perfect solution for racking of active / non-active casks within a cellar

Installing the system can half your racking space requirement for real ales by simply stacking cask one above the other

Each combination incorporates cask tilt mechanisms for the perfect pint every time

Four good reasons for choosing this rack system

Saves you valuable cellar space
Maintainance free with a fully automatic cask tilt
Offers different stacking combinations to suit different cellar environments

All working parts come complete with manufacturers warranty

Build Specification

Racking System with Floor stillages on the lower level

Cask Sizes

Upper Tier - 9 Gallon casks

Lower Tier - 9,10,11,18 and 22 Gallon casks

Rack Length

The Standard Rack Length is 2300mm and allows for the use of any size cask on the lower level up to 22 Gallons max. If only 9 Gallon casks are to be used on the lower level a reduced rack 2000mm can be supplied at an additional charge.

Rack Height

The height to the top of a tilted 9 gallon cask on the upper tier is approximately 1600mm. If 9 gallon casks are to be used on both levels the upper tier of the rack can be lowered by 100mm make the overall height required 1500mm

Stillage Type

Mechanical Spring Auto-Tilt Stillages are supplied as standard for both levels although the lower level can be upgraded to Hydraulic Spring Stillages (additional charges apply). As the floor standing hydraulic spring stillage provides a slightly easier loading technique, this may be beneficial (but not essential) if 18 or 22 gallon casks are to be used on the lower level.

Application

This type of rack is ideal where a double row of casks is required but a lift truck is not required. The Floor Standing Stillages can be loaded by simply tipping the casks back onto the stillage whilst the 9 gallon casks can be manually lifted on to the upper tier (2 man lift).

Standard Sizes Available:

Height is to the top of a tilted 9 Gallon cask on the top row.

Order Code	Description	W	H	Tilts
2RS	1 over 1	700	1600	2
4RS	2 over 2	1230	1600	4
6RS	3 over 3	1750	1600	6
8RS	4 over 4	2300	1600	8
10RS	5 over 5	2850	1600	10
12RS	6 over 6	3450	1600	12